|
| 起源の場所: | シアン・シャンシ |
| ブランド名: | XZH TEST |
| 証明: | ISO |
| モデル番号: | XHLJ504 |
Cable Route tracer is specially-designed for detecting the underground cable layout position and underground depth in a certain range.
Cable route detector consists of signal transmitter and receiver (Cable fault pinpoint detector), both of which finish the detection. By united operation the Cable route detector could exactly pinpoint the cable route in the probable range of cable burial.
Output signal: intermittent: 0～50Vpp
Output power: 100W
Output current: 0～2A
Output frequency: 15kHz intermittent
Receiving mode: Magnetic sound synchronization
Receiving frequency: audio frequency
Magnification: 50,0000 times
Output impedance :350Ω
Quiescent current: less than 10Ma
Operating temperature:-10 ~ 55°C
Test buried depth of the cable
When you judge the buried depth of the cable, you can place the probe at an angle of 45 degrees with the ground on the position of the cable that has been measured, "move outward" perpendicular to the path. Find the most minor sound point in the middle of the probe, then the distance the probe moves is the buried depth of the cable. For the above operation essentials, please refer to the schematic diagram of probe placement in the following figure.
Schematic diagram of probe placement
